Description The module supports the standard 80211b/g/n protocol and has a built-in TCP/IP protocol stack. Users can configure the networking function using the existing device of the module or build a separate network controller. Support SPI| HSP丨SD10丨1UART丨 I2C丨12s丨pWM|1876 and other interfaces Built-in 288KB SRAM / 1MB Flash Wireless speed up to 150Mbps Compatible with AT firmware The module adopts a highly reliable package, which reduces the volume and weight of the product, saves production costs, is easy to automate, and is suitable for use in large-scale, low-cost modern production. Product characteristics The main chip uses W600, which is a 32-bit cortex-M3 core. 288KBSRAM, 8MbitFlash Support for SoftAP and Stati. n mode Support 802.11b/g/n standard protocol Support UART/GPIO/PWM, etc. Support for firmware upgrade (FOTA) Easy to use AT firmware instructions Specification list Package DIP-18 Size 26*16*3(.2)mm Storage RAM: 288KB, Flash: 8Mbit (l.MByte) Support interface UART/GPIOPWM/SPl/!?C/12S UART supports 1200bps-2Mbps, default 115200bps Antenna form Onboard PCB antenna, gain 2dBi Authentication method WEP/WPA-PSK/WPA2-PSK Wi-Fi mode Station/SoftAP/Station SoftAP Encryption method WEP64/WEP128/TKlP/CCMP(AES) Specification characteristics Parameter Input frequency 2.4GHz ~ 2.4835MHz Output Power 72.2Mbps PA output power – 12dBm 11b mode PA output power – 19 dBm All documentation please see on this page.
